products

100KW mounting roof panel system solar tiles support bracket

SOEASY solar roof mounting system is suitable for tile and metal roofs. It's adjustable can applicable to install the usual module to flush with the pitched roof. Besides, hanger bolt and L-feet provide you more workable solutions to choose.
  • Item NO.:

    solar roof structure
  • Lead Time:

    7-15 Days after confirmination
  • Product Orgin:

    Fujian,China
  • Brand:

    SOEASY
  • Shipping Port:

    Xiamen Part
  • Payment:

    T/T, L/C
  • Color:

    Sliver/Customized
  • Wind Load:

    42m/s
  • Snow Load:

    1.4KN/m²
  • Product Detail

Product Description 


Solar panels are normally mounted onto a roof or ground-mounted frame.There are lots of different types of frame, each designed for different types or roof, different aesthetics and roof coverings.These are almost always set kits from manufacturers and include all necessary components required. Typical types include: on-roof systems which sit above the existing roof covering and arethe most common type used for domestic and commercial properties in the UK; in-roof systems replace the roof covering (eg slate or tile) and sit directly on the roofs battons forming part of the water tight covering; flat-roof system are designed specifically for flat roofs; ground-mount systems are (surprisingly!)designed for ground based installations.


Technical Parameters

Application 

pitch roof, flat roof

Wind Load

42m/s

Snow Load

1.4KN/m²

Modules Layout

According to requirements

PV Modules

Framed

Modules Orientation

Portrait, Landscape

Modules Inclination

0-45°

Builing Height

20m

Standard

JIS 8955:2011/DIN1055/ASCE_7-05IAS/NZS 1170

Color

Natural

Warranty

10 Years


Product Features

  • Flexible ground mount system :This mounting system was specially designed for use in flat open areas. Modules can be arranged in various configurations.  No damage to the roof.
  • High pre-fabrication:Reduced installation times due to high pre-fabrication level.Simple components saves the labor cost and construction period significantly.Minimized assembly time and effort(up to 40%).


Installation

solar roof structure racking installation


Project Case



photovoltaic solar bracket rooftop residential project

Germany 20KW




Send A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
Kliplock Metal Roof PV Mount
Solar Metal Roof Clamp Solution
Without any penetration, Roof Clamps Solution are suitable for various Roof Types solar panel installation , such as Kliplock Roof, Standing Seam Roof etc.
TrimDeck Metal Roof PV Structure
Solar Metal Roof L Feet Solution
L Feet Solution is largely used in trapezoidal roof type solar pv plant.  It has adopted the self-tapping screw to stick into purlin, which has increased the strength to the whole system.
Corrugated Clad Roof PV Racking
Solar Metal Roof PV Hanger Bolt Solution
Hanger Bolt Solution is largely used in trapezoidal roof type solar pv plant. This solution has a larger interval between solar panel and roof, which is benefit for heat disspation and promoting up the power generation.
Metal Roof Adjustable Racking Structure
Solar Adjustable PV Mounting Solution
Adjustable Mounting Solution is largely used for the facing north metal roof solar pv power plant. Complementing the roof tilt and turning the solar panel face south has enlarged the capacity of the metal roof solar pv power plant.
Lysaght Kliplok 700 Solar Mount
SE700 Kliplok Clamp Solution
SE700 Kliplock Clamp Solution is widely used and perfectly matched  in solar pv plant installation of Lysaght 700 Roof, It can incease the height by adding L Feet Kit on it to enlarge the spacing between solar panel and roof, which can promote up the efficiency of solar power generation.
solar metal rooftop mounting system
easy installation solar metal roof structure mounting
Different roof types use special design clamps without damaging theroof, which can offer a more convenience, economic, and safe mounting solution for metal sheet solar pv power plant.
solar rooftop mounting bracket
OEM residential solar mounting rooftop structure rack
Roof mounts tend to be the least expensive way to mount your solar system because they take advantage of your existing roof structure to provide a foundation for your panels. This saves money in racking material and labor costs to complete the installation.
Residential Solar Panel Roof Mount
aluminum solar mounting system for metal roof
SOEASY's roof bracket installation system is designed to strive for the maximum benefit for customers. The factory pre-assembled design makes the installation process easier and more convenient, and saves a certain amount of labor costs. Whether it is commercial, industrial or residential, SOEASY will be a good choice.
Register For Newsletter

Sign up for our monthly promotion and get out latest product news!

Send A Message
Send A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

products

about

contact